Skip to main content

The doors to our Whitianga and Paeroa offices will be closed for the summer break from 4pm on Friday, 20 December, while our Taupō and Hamilton offices will close for the summer break at 1pm on Tuesday, 24 December. All offices will reopen on Monday, 6 January 2025. To report air or water pollution, unsafe water activities in or on a river, lake or harbour, or make a general enquiry or information request during this time, call us 24/7 on 0800 800 401.

Close alert

Air quality

Waikato progress indicators – Tupuranga Waikato

Waikato Progress Indicators - tupuranga Waikato

Image - burning tires

AIR QUALITY

WPI - no change icon   NO SIGNIFICANT CHANGE

(Note: trend indicator above is relative to 2007 WPI baseline year.)

There was a substantial reduction in the level of fine particles in the air in our urban areas up until 2020. The evidence for continuing reduction since then is no longer apparent.

This indicator measures the number of times the regional guideline for the level of fine particles in our air has been exceeded each year, across all air quality monitoring sites in urban areas within the Waikato region.

Why is this indicator important?

Fine particles in the air are referred to as ‘PM10’ particles – those which are smaller than 10 microns (1000 microns = 1 millimetre). Sources of PM10 particles include vehicle emissions, industry emissions and home fires.

PM10 can affect people’s health, causing respiratory problems, especially for asthmatics, small children and the elderly. Some affected people can end up in hospital. For those who are particularly sensitive, the effects of high levels of PM10 can be fatal. PM10 also affects air by reducing visibility, which if particularly severe, could affect the safety of people moving around our urban areas on foot or by road.

Monitoring these sites helps councils to identify and manage air quality issues. When sources of excessive PM10 emissions can be identified, councils can work with the people or organisations involved to help them reduce their output of PM10 and comply with the National Environmental Standards for Air Quality. Raising awareness of what contributes to high levels of PM10 in our air – and the effects it can have - also helps people find out what they can do to keep PM10 levels down (for example, by not burning wet wood, as this produces high PM10 levels).

Air quality exceedances

Waikato Progress Indicators - Air quality graph

Year Air quality exceedances
2003 27
2004 50
2005 38
2006 47
2007 20
2008 28
2009 38
2010 22
2011 20
2012 17
2013 12
2014 11
2015 10
2016 5
2017 12
2018 2
2019 5
2020 13
2021 39
2022 15
2023 18

Notes: (1) Increases in the number of exceedances from around 2019/20 may be attributed to the roll-out of new optical based monitors which measure a higher number of exceedances than the older monitors. Other regions have also identified increases in the number of exceedances due to the recent introduction of these new monitors. (2) Future reporting will be against PM2.5 rather than PM10.

 

What is this indicator telling us?

  • PM10 levels throughout the Waikato region are good or acceptable for most of the year. However, for a few days each year in some locations, typically on calm winter days, levels of fine particles in our air exceed the National Environmental Standard (NES) as well as the regional guidelines.
  • The majority of PM10 in urban areas is from home fires, mainly from burning wood in winter. Other sources such as industry and emissions from motor vehicles can also contribute to air pollution.
  • The number of annual exceedances in Tokoroa continues to be higher than NES targets, mostly due to non-compliant fireplaces and burning wet wood.
  • Taupō and Te Kūiti are also no longer meeting the NES targets which is also mostly attributed to non-compliant fireplaces and burning wet wood.
  • Increases in the number of exceedances from around 2019/20 may be attributed to the roll-out of new optical based monitors which measure a higher number of exceedances than the older monitors. Other regions have also identified increases in the number of exceedances due to the recent introduction of these new monitors.
  • New Zealand has no national standard for PM2.5 (fine particulate matter) concentrations and only a few sites in major cities monitor such concentrations, but PM2.5 is now being monitored in six sites including Tokoroa, Te Kūiti, Taupō and Hamilton. Current amendments to the NES are likely to introduce long and short term PM2.5 standards which are anticipated to be aligned with recent updates to the World Health Organisation guidelines. PM2.5 will then replace PM10 as the main air quality indicator.
  • Overall, New Zealand has a low annual average level of particulate matter in urban areas by international standards. The OECD air quality update based on latest available 2019 data indicates that New Zealand has the fourth lowest mean population exposure to fine particulate in the world (just slightly higher than Estonia, Sweden and Finland).

DATA SOURCE AND SUPPORTING INFORMATION

Data for Waikato monitoring sites are available online annually via Waikato Regional Council’s Environmental Indicators > Air Quality.

Data for most monitoring sites throughout New Zealand, and for selected countries similar to New Zealand, are reported through the Environmental Health Indicators New Zealand (EHINZ) website.

Data for regional council monitoring sites throughout New Zealand are also reported through the Land, Air, Water Aotearoa (LAWA) - Air Quality site.

International data are available from the OECD.

Update details: Annual data to 2023 with 2024 results expected in early 2025.

Customised data request requirements: Waikato Regional Council Environmental Scientist.

DATA AVAILABILITY – OTHER THAN WAIKATO REGION:

Territorial Authority (TA) disaggregation: No

Other regions: No

New Zealand: No

Other countries/ Organisation for Economic Co-operation and Development (OECD): Yes (selected countries reported by the Ministry for the Environment)