Page content Page content Section navigation Topic navigation Accessibility keys Sitemap Search Contact us www.govt.nz portal
Go to Waikato Regional Council homepage
search icon mail icon contact us icon

  Services » Publications » Technical reports - by year » TR200222

Resource Capacity Estimates for High-Temperature Geothermal Systems in the Waikato Region

Report: TR 2002/22
Author: Sinclair Knight Merz Limited

Abstract

Estimates of resource capacity, expressed as equivalent electrical generating capacity using current technology, have been made for geothermal systems in the Waikato region, using a stored heat approach and resource lifetimes of 30, 100, 200 and 300 years.

Total generating capacity for the Waikato geothermal fields is estimated to be 3100 MWe, for a 30 year resource life and using median resource parameters.  Summing the 10th and 90th  percentile estimates for the individual fields (which gives a greater than 90% confidence) realistic minimum and maximum values of 2200 and 4400 MWe are obtained.  Increasing the resource life to 300 years, and using natural heat flow as a the lower limit on extraction rate, total generating capacity falls to about 420 MWe (median value). 

Generating capacity based on natural heat flow is greater than 40 MWe in four geothermal fields: Wairakei, Waimangu, Waiotapu-Waikite and Rotokawa.  Estimates based on natural heat flow can be considered potentially physically sustainable, minimum capacities, although this does not mean that extraction at that level would have zero environmental effects. 

Resource capacities based on stored heat do not necessarily provide a good indication of long term productivity.  In addition to stored heat, productivity is dependent on factors that may only be quantifiable when the resource is produced, such as susceptibility to groundwater incursion, or the ability of the system to provide enhanced recharge of hot fluid from the system upflow.

The capacity estimates presented in this review are based on currently available information for the individual fields and Sinclair Knight Merz’s knowledge of analogous systems in New Zealand and overseas.  It can be expected that the capacity estimates will be refined as more information becomes available.

Resource Capacity Estimates for High-Temperature Geothermal Systems in the Waikato Region
(372 kb, 53 seconds to download, 56k modem)

Table of contents

  Introduction 4
2. Methodology 7
2.1 Estimated Resource Parameters 8
2.2 Definitions and Criteria 9
2.2.1 Areal Extent 9
2.2.2 Thickness 9
2.2.3 Volume 10
2.2.4 Void Space 10
2.2.5 Temperature 10
2.3 Stored Heat Resource Capacity Estimate 10
2.3.1 Basic Deterministic Method 10
2.4 Worked Example 12
2.5 Probabilistic Method 14
2.6 Capacity Based on Heat Flow 17
3. Issues of Sustainability 18
4. Resource Parameters for Individual Fields 20
4.1 Atiamuri 21
4.2 Horohoro 22
4.3 Horomatangi 23
4.4 Mangakino 24
4.5 Mokai 25
4.6 Motuoapa 26
4.7 Ngatamariki 27
4.8 Ngauruhoe 28
4.9 Ohaaki 29
4.10 Ongaroto 30
4.11 Orakei Korako 31
4.12 Reporoa 32
4.13 Rotokawa 33
4.14 Ruapehu 34
4.15 Tauhara 35
4.16 Te Kopia 36
4.17 Tokaanu-Waihi-Hipaua 37
4.18 Tongariro (Ketetahi) 38
4.19 Waimangu 39
4.20 Waiotapu-Waikite 40
4.21 Wairakei 41
5. Resource Capacity Estimates 42
6. References 45
About this site     Contact us     Feedback and complaints New Zealand Government